GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #3: Wed Dec  2 00:54:28 MSK 2009
    bel@bel.localdomain:/usr/obj/usr/src/sys/SUNC3D
real memory  = 1073741824 (1024 MB)
avail memory = 1020018688 (972 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (450.01 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (450.01 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
wlan: mac acl policy registered
ispfw: registered firmware <isp_1000>
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd1 at kbdmux0
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> mem 0x1fe00004000-0x1fe00005fff,0x1fe01000000-0x1fe010000ff,0x1fe00000000-0x1fe0000cfff irq 2033,2030,2031,2021,2024,2034 on nexus0
pcib0: Psycho, impl 0, version 4, IGN 0x1f, bus B, 33MHz
initializing counter-timer
Timecounter "pcib0" frequency 1000000 Hz quality 100
pcib0: DVMA map: 0xfc000000 to 0xffffffff, streaming buffer
pcib0: [FILTER]
pcib0: [FILTER]
pcib0: [GIANT-LOCKED]
pcib0: [ITHREAD]
pcib0: [GIANT-LOCKED]
pcib0: [ITHREAD]
pcib0: [FILTER]
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
scc0: [FILTER]
uart0: <SAB 82532 v3.2, channel A> on scc0
uart0: [FILTER]
uart0: CTS oflow
uart1: <SAB 82532 v3.2, channel B> on scc0
uart1: [FILTER]
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: [FILTER]
uart2: keyboard (1200,n,8,1)
kbd0 at sunkbd0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
uart3: [FILTER]
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
pcm0: <Sun Audiocs> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 on ebus0
pcm0: [ITHREAD]
pcm0: [ITHREAD]
pcm0: <CS4231A Codec Id. 10>
hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 00:03:ba:01:14:e8
hme0: [ITHREAD]
sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: [ITHREAD]
sym1: <875> port 0x1400-0x14ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f at device 2.0 on pci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0x1820-0x183f at device 2.1 on pci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
ehci0: <VIA VT6202 USB 2.0 controller> mem 0x110000-0x1100ff at device 2.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <VIA VT6202 USB 2.0 controller> on ehci0
fwohci0: <VIA Fire II (VT6306)> port 0x1880-0x18ff mem 0x112000-0x1127ff at device 2.3 on pci0
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 ff:ff:ff:ff:ff:ff:ff:ff
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link undef, max_rec 65536 bytes.
fwohci0: max_rec 65536 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: fe:ff:ff:ff:ff:ff
fwe0: Ethernet address: fe:ff:ff:ff:ff:ff
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: ff:ff:ff:ff:ff:ff:ff:ff @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xfff58000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
ath0: <Atheros 5212> mem 0x120000-0x12ffff at device 5.0 on pci0
ath0: [ITHREAD]
ath0: AR2413 mac 7.9 RF2413 phy 4.5
pcib1: <U2P UPA-PCI bridge> mem 0x1fe00002000-0x1fe00003fff,0x1fe01800000-0x1fe018000ff,0x1fe00000000-0x1fe0000cfff irq 2032,2030,2031,2021,2024,2034 on nexus0
pcib1: Psycho, impl 0, version 4, IGN 0x1f, bus A, 33MHz
pcib1: [FILTER]
pci1: <OFW PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x100000-0x1000ff at device 1.0 on pci1
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:80:48:32:0b:69
rl0: [ITHREAD]
creator0: <Creator3D> mem 0x1fc00000000-0x1fc000003ff,0x1fc00400000-0x1fc005fffff,0x1fc00600000-0x1fc007fffff,0x1fc01000000-0x1fc013fffff,0x1fc01400000-0x1fc017fffff,0x1fc01800000-0x1fc01bfffff,0x1fc01c00000-0x1fc01ffffff,0x1fc02000000-0x1fc02ffffff,0x1fc03000000-0x1fc03ffffff,0x1fc04000000-0x1fc043fffff,0x1fc04400000-0x1fc047fffff,0x1fc04800000-0x1fc04bfffff,0x1fc04c00000-0x1fc04ffffff,0x1fc05000000-0x1fc05ffffff,0x1fc06000000-0x1fc07ffffff,0x1fc09000000-0x1fc097fffff,0x1fc09800000-0x1fc09ffffff,0x1fc0a000000-0x1fc0affffff,0x1fc0b000000-0x1fc0b7fffff,0x1fc0b800000-0x1fc0bffffff,0x1fc0c000000-0x1fc0c3fffff,0x1fc0c800000-0x1fc0cffffff,0x1fc0d000000-0x1fc0d7fffff,0x1fc0d800000-0x1fc0dffffff irq 1925 on nexus0
creator0: console
creator0: resolution 1280x1024
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x300>
Timecounter "tick" frequency 450013640 Hz quality 10
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ugen1.2: <Logitech> at usbus1
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
(probe6:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe6:sym0:0:6:0): CAM Status: SCSI Status Error
(probe6:sym0:0:6:0): SCSI Status: Check Condition
(probe6:sym0:0:6:0): NOT READY asc:3a,0
(probe6:sym0:0:6:0): Medium not present
(probe6:sym0:0:6:0): Unretryable error
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAN3367M SUN36G 1502> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
da0: Command Queueing enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LC 0003> Fixed Direct Access SCSI-3 device 
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit)
da1: Command Queueing enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #1 Launched!
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM: da0: adding VTOC8 information.
GEOM: da1: adding VTOC8 information.
Trying to mount root from ufs:/dev/da0a
bridge0: Ethernet address: fa:eb:3a:37:89:6e
wlan0: Ethernet address: 00:11:95:e5:26:d9
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
ugen2.2: <USB> at usbus2
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:2:0:-1: Attached to scbus2
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da2 at umass-sim0 bus 0 target 0 lun 0
da2: <USB BAR 2.00> Removable Direct Access SCSI-2 device 
da2: 40.000MB/s transfers
da2: 124MB (255744 512 byte sectors: 64H 32S/T 124C)
ehci_interrupt: unrecoverable error, controller halted
cmd=0x00010020
 EHCI_CMD_ITC_1
 EHCI_CMD_ASE
sts=0x0000b000
 EHCI_STS_ASS
 EHCI_STS_REC
 EHCI_STS_HCH
ien=0x00000037
frindex=0x0000169e ctrdsegm=0x00000000 periodic=0xfee30000 async=0xfee35600
port 1 status=0x00001000
port 2 status=0x00001000
port 3 status=0x00001005
port 4 status=0x00003400
ehci_dump_isoc: isochronous dump from frame 0x053:
ITD(0xfffff800813a3900) at 0xff185900
 next=0xff384204
 status[0]=0x00000000; <>
 status[1]=0x00000000; <>
 status[2]=0x00000000; <>
 status[3]=0x00000000; <>
 status[4]=0x00000000; <>
 status[5]=0x00000000; <>
 status[6]=0x00000000; <>
 status[7]=0x00000000; <>
 bp[0]=0x00000000
  addr=0x00; endpt=0x0
 bp[1]=0x00000000
 dir=out; mpl=0x00
 bp[2..6]=0x00000000,0x00000000,0x00000000,0x00000000,0x00000000
 bp_hi=0x00000000,0x00000000,0x00000000,0x00000000,
       0x00000000,0x00000000,0x00000000
SITD(0xfffff800813b4200) at 0xff384200
 next=0xfef85502
 portaddr=0x00000000 dir=out addr=0 endpt=0x0 port=0x0 huba=0x0
 mask=0x00000000
 status=0x00000000 <> len=0x0
 back=0x00000001, bp=0x00000000,0x00000000,0x00000000,0x00000000
ehci_interrupt: blocking interrupts 0x10
g_vfs_done():da2s1[WRITE(offset=512, length=8192)]error = 5
g_vfs_done():da2s1[WRITE(offset=512, length=8192)]error = 5
g_vfs_done():da2s1[WRITE(offset=512, length=8192)]error = 5
fsync: giving up on dirty
0xfffff800b3514588: tag devfs, type VCHR
    usecount 2, writecount 0, refcount 19 mountedhere 0xfffff800819e7c00
    flags ()
    v_object 0xfffff80081b81008 ref 0 pages 16
    lock type devfs: UNLOCKED
	dev da2s1
g_vfs_done():da2s1[WRITE(offset=512, length=8192)]error = 1
g_vfs_done():da2s1[READ(offset=127488, length=2048)]error = 5